22/7 PCB Order
I just got these PCBs in the mail from I’m impressed with the quality. This is an update of my my 22/7 PCB. I made a couple small improvements. The 22/7 is a CMOS based Big Muff. A very…
Mitchell
Glitchstorm & Bytebeats
Glitchstorm is an Arduino powered byte beat generator. Arduino, if you are not familiar, is an open source hardware programming platform. Rather than surf the web and send email, you can use Arduino to open your garage door, and flash…
AionFX Qudratron a Lovetone Doppelgänger clone
Here’s another epic pedal build. The Lovetone Doppelgänger is a phase shifter with lots of extras. It has 4 phase shift stages and two LFOs and options for all of this. The Quadratron is not a direct clone of the…
AD110 progress
Been working on this Eurorack drum module. This is a pretty epic kit :
RunOffGroove.com turns 20 years
RunOffGroove.com is one of my favorite sites for original stomp box inspiration and innovation. I built my first projects using the schematics and layouts there. The ideas presented are innovative. I’m very impressed with the UBE Screamer and 22 You…
New Boards from PCBWay
Just got some new boards from PCBWay.com. These are RunOffGroove’s 22 This is a Big Muff built around MOSFet inverters in place of the Bipolar transistors used in the standard Big Muff. This is a great sounding Big Muff. If…
Rehousing the Boss DS-1
After my last couple projects rehousing new circuits in Boss enclosures I was left with several DS-1 PCBs. These were populated with some or all of the parts! I decided I couldn’t let these go to waste! If you’re interested…
Weston Audio AD110 progress
This is a 6 voice analog drum module based on the Boss/Roland DR110. I saw this thread over on Mod wiggler. It looked like a fun module that I could get some use out of. Weston Audio has a few…
Morbid Fur
Here is a build of the Morbid Fur fuzz. There were a few errors in my first version of this PCB. All my fault. I had these boards manufactured at PCBWay. com. They do great work and have many options…
Thonk
I have been planning to work on some Eurorack projects. Turns out it’s hard to find the correct jacks, or at least the PCB mount variety. I got a few on Aliexpress to experiment with I’ll talk about these in…
Shameless Plug…
I entered my PCB design in the PCBWay design contest vote for me! This is a PCB for Tim Escobedo’s Ugly Face. Anyone that hasn’t built one of these you should try it. You won’t play it on every…
Ugly Face PCB on PCBWay
I designed this PCB for Tim Escobedo’s Ugly Face and had it manufactured at PCBWay. I used Eagle PCB to design the board. The process was not hard with a little research. I started by finding the PCBWay Eagle DRU…