Here’s another Life clone. I’d say this is really an evolution of the Life pedal. It has the octave as a switchable option. The octave comes before the fuzz section and is mixed with the input buffer. Makes for a…
Great overdrive/distortion with good dynamics and clarity cleans up well with volume knob. You can buy this one at my Reverb Shop. Or, build your own! Order PCBs from OSH Park and follow the build doc. Vulcan On OSH Park…
Built with PedalPCB.com PCB good range of heavy overdrive through distortion and fuzz tones. I built three of these and put this on my Reverb Shop.
This UBE Screamer by RunOffGroove.com is a unique twist on the venerable Ibanez Tube Screamer TS-808. It replaces the op-amps and transistor stages with a single hex inverter using an inverter in place of each op-amp and transistor. This has…
Just published the Ugly Face v 1.1 to OSH Park. Built and tested, it works well! This is classic DIY project, it’s almost a rite of passage for new DIY stomp box enthusiasts. The Ugly Face is more of a…
Here’s a Vulcan V1.2 circuit it adds reverse polarity protection, and ground pads for input and output jacks. These are available on OSH Park. Order some boards and follow the build guide to build your own Vulcan. Vulcan On OSH…
Vulcan pcb built up. This is version 2.
Vulcan PCB. This is a great sounding overdrive by Joe Davisson.
Some old fracrack synth modules. The last is a Blacet Mixer Processor. The others are DIY. These DIY modules are 2 x 8 step sequencers. These are barebones they don’t have any quantization or even LEDs for the steps. These…
effectpedal: Making PCBs on the Othermill. Designed in Eagle. I played with the trace size. The default traces in the bantamtools DRC is really small. The 8mil traces are easily damaged.
Building some ugly faces