Templates from Ponoko
I just got these templates from Ponoko.
New work in progress
A nice opamp big muff PCB Mad bean Shark Fin. Based on the maestro filter sample and hold. I’m obsessed with this circuit, I’ve built several versions of it and own some boutique iterations. Ooh look an ugly face, this…
Tube Steak build
Tube Steak build was originally published on Super-Freq
More OSH Park PCBs
These are some more PCBs from OSH Park. There is an IC Big Muff, Tube Steak, and a Woolly Mammoth. The Tube Steak I created from a schematic posted by Charlie Barth at Moosapotamus.net. Tube Steak Fuzz is a cross between…
Zeke Bass distortion
Completed clone of the Ezekiel 25:17 Bass Distortion by D*A*M. I built this with PCBs from OSH Park, see my previous post.
Super Hard On – OSH Park
Three Super Hard On’s built from PCBs from OSH Park. This layout was compact and well arranged. Off board pads were all arranged in a row on one edge, I used four conductor ribbon cable for neat wiring. The ribbon…
Zeke Bass Distortion – OSH Park
This Zeke Bass Distortion is a clone of the D*A*M Ezekiel 25:17 Bass distortion. The PCB came from OSH Park. This worked out well. The board is pretty big so soldering parts is easy. The rotary switch and pots are…
Fuzz Factory – OSH Park
Just soldered the first of three Fuzz Factory PCBs from OSH Park. Fired up on the first try. The board didn’t come with documentation, I had reverse engineer the board against the schematic to verify part numbers. Here is the…
Osh Park PCBs
I just received this order from OSH Park. I order four boards. You are required to buy three copies of each board you order. The cost is $5 per square inch for 2 layer boards (with 3 copies of your…
Resources to get started making stompboxes
Getting Started Someone asked me about getting started building stompboxes, so I thought I’d put it all in a forum post, for your enjoyment and edification. Become a member of both of these forums. Search, and read what’s posted there.…
OSH PARK
This is a really cool service that manufactures open source PCB designs. You can order any of the open source designs on the site. Most of the stuff is not stompbox oriented. It takes a little google-fu to search up…
Good Articles on CMOS Chips in Stompboxes
Here are some good articles on using CMOS chips in stompboxes.